NEO Coolcam Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with SmartThings and Vera

Add your review

View pricing on Amazon

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: $31.99
(as of Jul 30,2021 03:37:27 UTC – Details)


Product Description

light switch
light switch

Z-Wave Plus Light Switch is an intelligent device that can be remotely controlled through Z-Wave network and radio waves. In the Z-Wave network communications, light switch can be connected to any Z-Wave gateway. Cannot be use alone, requires Z-Wave gateway controller.

These two touch buttons can support controlling 2 channels relays to turn on/off. Connect two output devices, each gang supports 16A max. You can set a timer to automatically turn on the lights in your room and control the smart light switch when away from home. Work with most any Z-Wave Hub including: SmartThings, Vera, Fibaro, HomeSeer, Iris and Aeotec.

light switch
light switch

Enjoy smart life with NEO Coolcam light switch

Automate your NEO smart switch with Z-Wave gateway and set it to turn lights on or off when you get home.

FEATURE

remote

remote

schedule

schedule

touch

touch

installation

installation

Remote Control

Do you always forget to turn off the light when you are in bed or when you go out?

With the NEO smart light switch, you can remotely control the state(on/off) of switch on your smart phone from anywhere

Special Schedule

Set timing schedule

Set a timer to automatically turn on the lights in your room.

Energy Saving

Check to see if you forget to turn off the lights from APP.

Touch Control

Touch Sensitive

Smart chipset provide immediately response.

Indicator on at Night

Low-light display, make you easy to find the light switch at night.

Overload Protection

Cut off the power automatically.

Easy Installation

Meet the requirements of traditional switch wiring, no need to change the exiting wire.

light switch
light switch

Technical Parameters

Power: AC power; 110-230V; AC+/-10%; 50/60Hz

Power consumption: 1.2W

Operating mode: touch-sensitive

Switch output: Can connect one/two output devices,

and supports 16A max

Working temperature: 0-40℃

Wireless protocol: Z-Wave

Wireless frequency: 908.4MHz US,

Wireless range: Outdoor 80 meters, indoor 40 meters

Dimensions (Dx Wx H): 120mm x 74mm x 37mm

1
1

How to easily replace a light switch?

1. Before install, make sure to cut off the power.

2. Remove the panel with a screwdriver;

3. Connect the wire according to the marks of L/N.

4. Fixed it to the box;

5. Install the panel back to the switch and power on and and be ready to use.

2
2

How to easily replace a light switch?

1. Before install, make sure to cut off the power.

2. Remove the panel with a screwdriver;

3. Connect the wire according to the marks of L/N.

4. Fixed it to the box;

5. Install the panel back to the switch and power on and and be ready to use.

3
3

How to easily replace a light switch?

1. Before install, make sure to cut off the power.

2. Remove the panel with a screwdriver;

3. Connect the wire according to the marks of L/N.

4. Fixed it to the box;

5. Install the panel back to the switch and power on and and be ready to use.

4
4

How to easily replace a light switch?

1. Before install, make sure to cut off the power.

2. Remove the panel with a screwdriver;

3. Connect the wire according to the marks of L/N.

4. Fixed it to the box;

5. Install the panel back to the switch and power on and and be ready to use.

1
1

1

2
2

2

3
3

3

4
4

4

【SIMPLE OPERATION】 Each light switch has a unique ID code. When you add or remove the switch from the alarm host, just place light switch in the Z-wave network range of gateway. The LED Night Navigation can easily to spot the position of the lights in the night.
【MAKING A COMPARISON】Compare with the traditional light switch. The device not only does it allow for manual control, but also remote. Meet the requirements of traditional switch wiring, no need to change the exiting wire.High Touch Sensitive, it can provide immediately response. You also can check the real-time status of lights from your mobile phone APP. Remind you to turn off lights and save energy.
【AUTOMATE YOUR LIFE】 Automate your NEO smart switch with Z-Wave gateway and set it to turn lights on or off when you get home. The smart switch can control incandescent, resistive, fluorescent, and inductive lights. Only used indoor, NOT dimmer.
【Z-WAVE TECHNOLOGY】 Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Fibaro, Vera, Zipato and other hub. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway.
【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switches. 2) Please make sure there is a neutral wire in your switch box, which is required for installation. 3) Be sure the wiring is correct. Electric knowledge is required, otherwise please hire professional electrician.

NEO Coolcam Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with SmartThings and Vera
Hi-Tech N Gear
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0